When you arrive home
Pause before entering: Look at the property from a safe distance. Call 9-1-1 if you see an immediate threat to life or safety. Leave the area if you smell gas or propane, see downed power lines, unstable structures or other serious hazards.
Inspect the outside first:
- Walk around structures before entering, but stay well back from flood impacted buildings, chimneys and trees.
- Look carefully for fallen or damaged electrical lines, damaged propane or fuel tanks, sharp debris, open wells, damaged septic areas, and unstable slopes.
- Give emergency crews and utility workers room to operate. Drive slowly and follow traffic control.
- Keep children and pets away from standing water and damaged areas.
- Photograph or record video of the property before moving, cleaning or disposing of anything.
Enter with caution:
- Do not enter a building that appears structurally unsafe, smells of gas or propane, has visible structural damage or contains debris.
- If it is safe to enter, confirm the main power breaker is off before inspecting further. If the building, wiring, electrical panel or electrical equipment appears to have been affected by water, do not turn the power back on. Have the electrical system inspected by a licensed electrical contractor first. Wear appropriate protective clothing. Use an N95 respirator adjusted tightly to the face (read instructions on proper usage) and eye protection.
- Look for signs of structural damage, such as cracked or shifted foundations, sagging floors, or doors and windows that no longer close. Have a structural engineer assess it before you begin repairs.
- Check the roof from ground level for visible damage. Do not climb onto a water-damaged roof under any circumstances. Watch out for tripping or falling hazards including wires, debris, uncovered wells and septic tanks.
Hazards that may not be obvious:
- Weakened tree system roots, trunks and falling branches
- Asbestos, lead, treated wood, chemicals or other contaminants in structural debris
- Carbon monoxide from operating pumps, generators or pressure washers in confined or poorly ventilated areas
- Damaged underground electrical, water, fuel or septic infrastructure
- Mold, fiberglass fibres, and other inhalation hazards
- Unstable slopes, rockfall, erosion, flooding and landslides
- Pressurized cylinders, household and vehicle batteries, solvents, paints and garden chemicals damaged by water
- Floodwater rising without warning
- If there is significant water in a basement, PreparedBC recommends draining approximately one-third of the water per day to reduce the risk of structural damage
More information: Learn more about post-disaster building assessments on the BC Housing website. Look at building permit, re-inspections and permit history by your local building authority.
Managing mold and health risks
Tip: Before you start any cleanup activities, call your insurance representative or company. Most insurers have a 24-hour claims service. Your policy may cover professional flood restoration. If so, use a qualified contractor for structural damage, significant floodwater contamination, hazardous materials, extensive mold or debris resulting from flood water.
Cleaning up after a flood can pose health risks. You may see or smell mold on clothing, drywall, furniture, cardboard boxes or books, but it may also be hidden under or behind items like carpet, cushions or walls.
Mold grows in wet and damp conditions. It's less likely to grow if your home and furnishings are dry within 48 hours after a flood. This will help prevent mold, which can continue to damage your home long after.
Pregnant people, children, older adults, pets and those with asthma, allergies or other health problems should not be in or near the area where the mold is being cleaned up.
Identify all moldy items. Place and seal items in a plastic bag and dispose it. It's important to wash your hands thoroughly after mold cleanup, as well as change your clothes.
If you rent your home, speak to your landlord about any moisture or mold problems. It may be the responsibility of the owner or landlord to address the problem. If you own a condo unit or workspace, be sure to consult with the strata council before taking any action. Consider seeking professional assistance to identify the right corrective actions to be taken inside your home.
How to clean your home
Protect yourself: If your insurer has advised you to clean, wear an N95 respirator, safety glasses, durable gloves, long sleeves, long pants and sturdy footwear. Ventilate the area when outdoor air quality allows. Keep children and pets away from cleanup areas.
Before you begin cleaning up, be sure to open all interior and exterior doors and windows, allowing air to flow freely through the space. Do not use fans if mold is present, as this can spread the mold to new areas.
Scrub all washable surfaces with a household bleach solution or unscented soap solution. These areas include windowsills, concrete surfaces, hard surfaces and tiles. Dry surfaces quickly.
Essential list of items for cleaning mold:
- Bucket
- Stiff bristle brush
- Cleaning clothes
- Goggles
- Protective rubber gloves
- Waterproof rubber boots
- Dish detergent
- Household bleach
- N-95 respirators, or ones that provide more protection, available at hardware stores. Be sure to read the directions for proper use.
Cleaning:
- A bleach solution is made up of 1-part bleach to 10-parts clean water.
- You can make a baking soda solution by adding a ¼ tablespoon of baking soda to a spray bottle of warm water.
- A soap solution can be made by combining unscented detergent and warm water.
Mold and porous materials. Mold cannot be properly cleaned from many porous materials. Instead, dispose of materials that cannot be dried within 48 hours.
Before staying in the home, test all smoke alarms and carbon monoxide (CO) alarms using the test button. Replace batteries where needed and replace any alarm that is damaged, expired or does not work properly. If an alarm has been exposed to significant water damage, check the manufacturer's instructions to determine whether it should be replaced.
Water damage and mold
- Tell your insurer and restoration contractor as soon as possible if you see or smell mold or find water damage.
- Dry the building and contents as quickly as possible to help prevent mold. PreparedBC recommends drying wet materials within 48 hours where possible.
- Remove standing water only when electrical, structural and contamination hazards have been addressed.
- Clean washable hard surfaces with cleaning solutions mentioned above, then dry them thoroughly.
- Remove wet carpet underlay. Dry salvageable carpet and materials as quickly as possible.
- Use fans and dehumidifiers only when power is safe and the equipment will not spread contamination.
- Use professional mold remediation for large areas, recurring growth or contamination involving sewage or hazardous materials.
Tip: Before staying in the home, test all smoke alarms and carbon monoxide (CO) alarms using the test button. Replace batteries where needed and replace any alarm that is damaged, expired or does not work properly. If an alarm has been exposed to significant water damage check the manufacturer's instructions to determine whether it should be replaced.
Yards, play areas and pools
- After clean-up, remove flood-borne material from yards.
- Re-sod or reseed grassy areas as needed.
- Keep children and pets away from debris, damaged fencing, standing water and floodwater residue.
- Wash outdoor toys and play equipment with mild detergent and clean water. Ensure any floodwater is cleared away.
- If there is floodwater or structural damage to play equipment, consider blocking access to the area until play equipment is repaired or replaced.
- Replace sandbox sand and loose playground surfacing if cleaning floodwater residue is not possible.
- Have pools inspected for structural and equipment damage. Use a pool service company to restore water quality. If the pool water was not circulating or was treated, harmful bacteria may have grown in the water.
- Drain, scrub clean and refill hot tubs before use, then balance and disinfect the water.
Fruit and vegetable gardens
- It may not be safe to eat fruits or vegetables that were growing above ground during the floodwater event, especially if covered with floodwater. Discard fruits and vegetables if visible impacts from floodwaters are present.
- In areas where floodwater directly impacted fruit-bearing trees or berry bushes (e.g. raspberries, apples, blueberries, soft fruit), as a precaution, consumption of fruit from gardens, forest or alpine areas to which floodwater impacted is not recommended.
- Regularly wet down gardens and lawns until the floodwater residues are diluted.
- Consider adding new, clean soil to gardens if you suspect or know the area was impacted.