Contact your local building authority: Local building authorities adhere to the British Columbia Building Code 2024 and may have specific bylaws.
Removing wet drywall, insulation, flooring and damaged content to dry out your home does not require a building permit. Repairing or rebuilding the building itself may require specific permits before starting work such as:
- Repairs to foundations, footings, beams, posts, or floor, wall or roof framing
- Replacing or relocating plumbing, hot water tanks or drainage
- Reinstalling or replacing a wood stove, fireplace insert or chimney
- Demolishing all or part of a building (a hazardous materials survey may be required first; see Floodwater Debris and Waste Removal section above)
- Raising, moving, adding to or rebuilding a building
- Placing a temporary dwelling, RV or trailer on the property to live in while you rebuild
Be aware of specific code compliance requirements
Examples might include:
- Fire-rated walls: Walls between a house and an attached garage, or between a home and a secondary suite, are fire separations. If drywall is removed from these walls, it must be replaced with fire-rated drywall to meet the BC Building Code.
- Wood stoves and chimneys: Do not use a wood stove, fireplace or chimney that was in floodwater until it has been inspected by a qualified (WETT-certified) inspector.
- Rebuilding in a floodplain: A building that is substantially rebuilt must meet the current BC Building Code. In floodplain areas, rebuilt or new construction may need to meet minimum floor construction elevations (flood construction levels) and setbacks. On properties at risk of flooding, debris flow or erosion, a report from a professional engineer may be required before a permit is issued. Speak with your local building and planning departments before designing a rebuild.