Water safety
B.C.'s regional health authorities administer the Drinking Water Protection Act and oversee drinking water systems. Within the SLRD, Interior Health serves Electoral Areas A and B, while Vancouver Coastal Health serves Electoral Areas C and D. Find water quality notifications on the Government of British Columbia website.
- If you receive water from a community water system, follow all instructions or notices issued by the water supplier or health authority.
- If you use a well, have the system inspected and the water tested after a flood. Water may be contaminated even if it looks, smells and tastes normal.
Private Wells
If floodwater reached your well, assume the water may be contaminated. Floodwater can carry bacteria and other contaminants into a well or groundwater supply. Floodwater can enter a well or acquifer and affect water quality.
If your well was damaged or may have been exposed to flooding activities:
- Assume the water is unsafe until the system has been assessed and the water tested.
- Use bottled water for drinking, preparing food, making ice, brushing teeth, washing food or dishes, and giving water to pets.
- Do not use the water for showering, bathing or laundry unless the health authority confirms these uses are safe.
- Check the well and surrounding area for signs of damage or floodwater entry.
- A flooded well may need to be properly flushed and disinfected.
- Well water should be tested following appropriate rehabilitation or disinfection before relying on it as drinking water.
- If the well, pump, electrical system or wellhead has been damaged, have it assessed by a qualified professional.
- Contact your local health authority for advice about inspecting, testing and disinfecting the system.
- Do not rely on boiling alone. Boiling can kill many germs, but it does not remove chemical contaminants and may concentrate some chemicals.
Click on the links below for provincial information on flood management for water wells, including well disinfection and groundwater protection.
More information: Flood management for water wells – Province of British Columbia | HealthLinkBC Clean after Flood
Electricity and generators
BC Hydro. Contact BC Hydro at 1-888-769-3766 or *49376 from a mobile phone about outages, damaged infrastructure, or if you did not turn your power off prior to vacating your property.
- Remember that gas and electrical hazards may still exist long after flood waters recede.
- Contact a licensed contractor to inspect any safety hazards and ensure it is safe for you and your family.
- Electrical appliances or systems damaged by flooding can be dangerous if they're re-energized and used without being properly inspected by a licensed contractor.
- Visit technicalsafetybc.ca to find a contractor in your area.
- Have damaged wiring, panels and appliances assessed before restoring power.
- Use fuel-burning portable generators outdoors only if the flood water has entirely receded, and at least 6 metres (20 feet) from any home or building. Direct the exhaust away from doors, windows and vents. Never operate a generator in a garage, shed or other enclosed or partially enclosed space. Never connect a generator directly to a household circuit unless a qualified electrician has installed approved transfer equipment.
- Reconnecting your power after a flood:
- Contact a qualified electrical contractor to inspect your electrical equipment and appliances. Visit technicalsafetybc.ca to find a qualified electrical contractor in your area.
- The contractor will conduct a safety assessment of your property and apply for a permit from Technical Safety BC. In some cases, if emergency repairs are required, these may be conducted prior to a permit being issued. See Technical Safety BC's emergency repairs bulletin or call Technical Safety BC at 1-866-566-7233 for more details.
- Your contractor will advise BC Hydro when it's safe for your power to be reconnected.
- BC Hydro will arrange to have a crew reconnect your power within 24 hours. This is dependent on crews being able to safely access the area.
More information: BC Hydro – Know what to do in the event of a natural disaster | BC Hydro - Flood electrical safety information
Propane, natural gas and heating oil
Gas or Propane Smell. If you smell gas or propane, leave immediately. Do not operate switches, lights, fans, phones or anything that could create a spark. Call the supplier or 9-1-1 from a safe location.
- Do not touch or move a damaged propane cylinder or tank. Keep your distance and contact the fire department, supplier or another qualified professional.
- Ask the supplier or a licensed technician to inspect propane, natural gas and heating oil systems before use.
- Contact Technical Safety BC if you need information about required permits or inspections.
Septic systems
- If your home was directly affected by the floodwaters, or if the floodwaters were close to your home, have a Registered Onsite Wastewater Practitioner assess the system and recommend repairs. These individuals can be found by searching your geographic region at https://asttbc.org/applicants/rowps. Do not use the system unless you know it can safely handle waste. Systems with additional electrical components, such as dosing pumps or secondary treatment, should also be assessed to ensure safety.
- If you return home and there are signs of the system not working properly including drains flowing slowly and signs of wastewater breaking out on soil, a Registered Onsite Wastewater Practitioner should be contacted immediately for assessment and repair.
- Wood stoves and chimneys: Do not use a wood stove, fireplace or chimney that was in floodwater until it has been inspected by a qualified (WETT-certified) inspector.